3D View Configuration 3D View ConfigurationThe 3D View Properties section is available in the Configuration dialog, or by choosing the Change Display Properties button on the 3D View toolbar.
Unchecking the Draw the Terrain Surface checkbox will turn off the display of the terrain surface and draped data, leaving only any 3D vector data or Lidar point cloud data. This can be useful for adding relative offsets to 3D vector features, and the surface display is not needed.
Check this option to display multiple layers of elevation dataset at locations where the elevation datasets overlap. This is good for rendering subsurface terrains.
Vertical ExaggerationUse the slider or enter a value to control the vertical exaggeration. This is also available as buttons on the 3D Toolbar. For more information see Vertical Exaggeration.
Specify the background color to use in the 3D view. This color will only be visible when the Skybox Drop-down on the 3D toolbar is set to None (Solid Background).
Specify the height when entering 
Walk Mode. Height can be enter as above Ground (based on the top terrain surface) or Sea Level (elevation above 0) using the drop-down.
Display Water in the 3D View
Toggle on and of the display of water. This is also available as a button on the 3D Toolbar.
Water Level
Use the slider to adjust the water level height and the units of measure. Increment buttons are also available to control this on the 3D Toolbar.
Water Level Increment
Specify the increment used when increasing or decreasing water level with the toolbar
Display 3D Vector Features in Space Above/ Below Terrain Surface
Use this option turn toggle on and off the display of 3D vector features. This setting does not impact Lidar data.
Relation of Vector Data Elevations to Terrain
Specify what the height or elevation values of vector features are relative to. This will only apply to layers with an Altitude Mode of Unspecified. It is overridden by Layer specified Altitude Mode or Feature specified Altitude Mode settings.
- Absolute
- Relative to Ground
- Clamp to Ground
- Depth
Show 3D Point Models
Turn on or off the display of point features specified with a 3D model style.
Display Lidar Features
Turn on or off the display of loaded LiDAR data in the 3d View.
Extrude 3D Areas to Surface (Useful for Buildings)
Turn on this setting to draw sides on 3D area features extending to the ground.
When extruding to the surface, the default base of the extrusion is set just below the minimum elevation, so your extruded areas should always extend through the terrain surface.
Draw 3D Vector Features Reflected on Terrain Surface
Check this option to drape 3D vector features on the terrain surface. Drapped vectors are not selectable.
Show 2D Map Cursor Location
The location of the cursor on the 2D map display will be indicated with a vertical line. Use the Color and Scale settings to modify the appearance of that line.
Show Active GPS Track
Check this option and the GPS track will be displayed in the 3D View window
Show Fly Through Paths
3D line features that have been set up at Fly-Through-Paths will be displayed when this is checked. By default Fly Though Paths are hidden.
Snap Edit and Measure Cursor to Feature
Check this option to enable Snap Cursor Mode. This setting is also available with the toolbar Snap Cursor button.
Orientation Indicator
Display a
Compass or
3D Axis in the 3D Viewer. These display is also available as buttons on the 3D Toolbar.
Orientation Indicator Height
Specify the height of the Compass or 3D axis. Then define what the height values is Relative to:
- Absolute
- Relative to Ground
- Clamp to Ground
- Depth
Onscreen notifications provide a notification message when properties are modified in the 3D view.
Check this option to toggle on onscreen notifications.
Specify the text color of the notification.
Specify how long the notification will appear after a property is changed.
Specify the position of the notification box in the 3D View.